Print guide
GTA 6 PS5 Printable Cover: Front, Spine and Back at 300 DPI
One printable sheet that covers a whole case — front plate, a 14 mm spine and a back plate — exported at 300 DPI so it survives a home printer.
- Spread
- 284 × 170 mm, front + 14 mm spine + back
- File
- 3353 × 2008 px PNG, 300 DPI
- Ratings
- ESRB M or PEGI 18, switchable
The measurements, before anything else
A game case is not a sheet of A4. The printable mode in this studio writes one spread that wraps around a standard Blu-ray style case:
| Part | Pixels | Millimetres at 300 DPI |
|---|---|---|
| Front plate | 1594 × 2008 | 135 × 170 mm |
| Spine | 165 × 2008 | 14 × 170 mm |
| Back plate | 1594 × 2008 | 135 × 170 mm |
| Whole spread | 3353 × 2008 | 284 × 170 mm |
PS4, PS5, Xbox One and Xbox Series cases share that footprint. Measure your own case with a ruler before the final cut anyway: regional printings differ by a millimetre or two, and a spine that is 1 mm wide shows a white sliver every time you pull the case off the shelf.
Filling the three plates
- Open the printable mode and pick the rating badge you want: ESRB M for the North American look, PEGI 18 for the European one.
- Drop a photo onto the front plate. This is the hero image — one subject, plenty of sky or wall around them, because the logo and rating sit on top of it.
- The spine takes a short vertical strip. A silhouette, a single letter, or one colour sampled from the front works better than a second portrait.
- The back plate is where the layout breathes: screenshots in a small grid, a few lines of copy, the rating box and a barcode placeholder.
- Export. You get a single PNG with all three plates in the right order, front on the left, back on the right.
Everything happens in the browser tab. No file is uploaded, no account is needed, and the export carries no watermark.
Paper and printer settings that actually matter
Paper. Glossy photo paper at 180 to 250 gsm is what a real sleeve feels like. Matte works too and hides fingerprints, but it makes dark neon artwork look flat.
Scale. Set the print dialog to 100 % and switch off fit to page, shrink oversized pages, and any borderless scaling option. These are the settings that quietly turn a 284 mm spread into a 260 mm one.
Paper size. A4 is 210 mm wide, so it cannot hold a 284 mm spread. Use A3, or 13 × 18 cm photo paper which is close enough to trim down.
Ink. Dark artwork drinks ink. If your printer has a photo mode, use it; if the first print comes out streaky in the blacks, print the same file again at the highest quality setting rather than trying to fix it in the image.
Trimming and assembly
The export includes light corner marks so you can see where the cut belongs.
- Score the two spine folds with a blunt craft knife and a steel ruler before folding. A hard fold on glossy paper cracks the ink along the crease.
- Cut the outside edges with a sharp blade against the ruler, not with scissors. Scissors bow the paper and the edges never come out straight.
- Slide the sheet into a spare case behind the clear plastic sleeve. Do not glue it to the sleeve; the plastic is what holds it flat.
- If the sheet keeps slipping, a single strip of double-sided tape along the spine fold is enough.
About the rating badge
The ESRB and PEGI marks drawn by this page are approximations, included so the layout reads correctly at a glance. They are not licensed rating marks, they are not official artwork, and they should not appear on anything you sell or distribute at scale. Keep exports to personal, fan-made use.
When the print comes out wrong
Everything is 8 % smaller than expected. Fit to page was still on. Turn it off and print again. The front plate is cropped at the top. Your printer's non-printable margin ate the edge. Use borderless photo paper, or scale to 98 % and accept a thin white border you can trim. The spine text is unreadable. The spine is only 14 mm wide; anything smaller than about 9 point type disappears. Use a shape or a single letter instead. Colours look duller than the screen. Paper cannot reproduce a bright neon pink backlit by a monitor. Push saturation in the comic filter before exporting, and expect the print to land darker than the preview.
If you only want something for a screen
Printing is a commitment. If what you actually want is a wallpaper, an avatar or a post for a group chat, the nine-panel cover template exports a 1666 × 1920 PNG in one click, and the Vice City cover maker does the same with a sunset palette. Both use the same photos and the same browser-only processing.
Common questions
What size is a PS5 cover in millimetres?
The printed sheet in this tool is 284 × 170 mm: a 135 mm front plate, a 14 mm spine and a 135 mm back plate. PS5 and PS4 cases share the same footprint, so the same file fits both.
Can I print it on A4 paper?
You can print the file on A4, but the artwork is 284 mm wide and A4 is 210 mm wide, so the printer will scale it down or clip it. A3, or 13 × 18 cm photo paper, keeps it at true size.
What DPI should I print at?
300 DPI. The export is already built at that density, so print at 100 % scale and turn off any fit to page or shrink to fit option in the print dialog.
Do I need special paper?
Glossy photo paper at 180 to 250 gsm looks closest to a real sleeve. Matte paper prints more like a booklet and shows fewer fingerprints.
Is the ESRB M badge official?
It is a fan-made approximation drawn by the page, included so the layout looks right. It is not a licensed rating mark and should not be used on anything you sell.
Will this fit an Xbox case?
The dimensions are the standard Blu-ray case footprint that PS4, PS5 and Xbox One and Series X cases all use, so yes — only the spine logo differs.